Sebo

Sebo / OpenRCT2 Multiplayer Server

Last active 12 hours ago

Like 0

Dedicated OpenRCT2 server with Docker Compose. Automatically loads the latest autosave on restart, so your park progress is never lost. Tested on UGREEN DXP6800 Pro.

docker-compose.yml Raw
1# OpenRCT2 Multiplayer Server
2# Tested on: UGREEN DXP6800 Pro (UGOS), Docker Compose
3#
4# What it does:
5# On startup, the newest autosave (.park or .sv6) is loaded automatically.
6# If no autosave exists yet, the server starts with the fallback map (see below).
7#
8# Requirements:
9# - Original RollerCoaster Tycoon 2 game files (your own copy) in ./rct2-data
10# - Optional: RCT1 game files in ./rct1-data
11# - A fallback map, e.g. config/save/sixflags.sv6
12# - Settings in config/config.ini:
13# [general]
14# game_path = "/docker/openrct2/rct2-data"
15# rct1_path = "/docker/openrct2/rct1-data" (only if you have RCT1 files)
16# autosave = 0 (0 = autosave every minute, recommended)
17# autosave_amount = 30 (number of autosaves to keep)
18# Without game_path, the server can't find the RCT2 files and won't start.
19# config.ini is created automatically on first start – edit it afterwards
20# and restart the container.
21#
22# Adjust:
23# - /volume2/docker/openrct2 → your own Docker folder
24# (my Docker runs on an NVMe volume = volume2, usually it's volume1)
25# - user: "UID:GID" → user/group with write access to the folders
26# (on UGREEN e.g. 1000:10, check with "id" via SSH)
27# - Port 30176 comes from my playit.gg tunnel (server online without port
28# forwarding). Without playit: use the OpenRCT2 default port 11753 and
29# forward it in your router. The port must match everywhere: port mapping,
30# "--port" in the command and your playit tunnel (if used).
31# - Replace the fallback map in the command (sixflags.sv6) if needed
32#
33# Note:
34# Watchtower is disabled via label. Server and players must run the same
35# OpenRCT2 version, an automatic update would otherwise block players from joining.
36# If you don't need this, you can pin a fixed version instead of "latest".
37
38services:
39 openrct2:
40 image: openrct2/openrct2-cli:latest
41 container_name: openrct2-server
42 restart: unless-stopped
43 user: "1000:10"
44 ports:
45 - "30176:30176/tcp"
46 volumes:
47 - /volume2/docker/openrct2/config:/docker/openrct2/config
48 - /volume2/docker/openrct2/rct2-data:/docker/openrct2/rct2-data
49 - /volume2/docker/openrct2/rct1-data:/docker/openrct2/rct1-data
50 entrypoint: ["sh", "-c"]
51 command: ["LATEST=$$(ls -t /docker/openrct2/config/save/autosave/*.park /docker/openrct2/config/save/autosave/*.sv6 2>/dev/null | head -n1); if [ -z \"$$LATEST\" ]; then LATEST=/docker/openrct2/config/save/sixflags.sv6; fi; exec openrct2-cli host \"$$LATEST\" --user-data-path /docker/openrct2/config --port 30176"]
52 labels:
53 - "com.centurylinklabs.watchtower.enable=false"